1. Coax wiring for each camera shall be:
   RG59U(Power and coax in same jacket...Called Combo cable RG59U and 18 awg/2 conductor
2. Coax will be labeled clearly at both ends and terminated at designated monitoring/switching/recording equipment (hereafter know as Monitoring Station) as identified by CWRU or its agents. Information on labels at both ends should include floors, location, and a sequential number.
3. Wiring to camera will be home runned from camera to Monitoring Station.
4. All exterior (non garage) cameras shall be have a 8" square, weatherproof, lockable enclosure mounted at CWRU or its agents direction no father than three feet from the camera unit (Houses A/C power and phone line transmission if applicable). Key lock on enclosure to be supplied by CWRU or its agents and installed by contractor.
5. All exterior or garage cameras shall have one 110v duplex outlet at the unit to support the heater blower. If the unit requires phone line or other medium transmission to the Monitoring Station, a second 110v duplex outlet shall be added for that equipment. Duplex outlet should be inside of weatherproof 12" x 12" x 6" enclosure in exterior non garage applications.
6. All exterior cameras shall be equipped with weather resistant housings and heater blowers.
7. Interior cameras may be equipped with interior grade housings depending on location and environment of camera/facility at CWRU or its agents direction.
8. All camera lenses shall be 1/3" automatic iris. The 1/3" automatic iris lenses shall be suitable for use in areas with varying light sources. The lenses shall be compatible with 1/3" black and white CCD cameras. Items such as the focal length, maximum aperture ratio, filter size, and angular field of view will vary depending on the item or area to be monitored and must be determined by the engineer in coordination with CWRU or its agents.
9. The black and white camera shall incorporate a 1/3" CCD interline transfer pickup device with 380,000 (768 [H] x 494[V]) pixels. The camera shall produce a horizontal resolution of 570 lines and signal/noise ration of 50 db. The camera shall feature an automatic gain control circuit to provide clear images in low light conditions. The camera shall deliver a usable black and white picture at a scene illumination of 0.08 lux at f/1.4. Signal processing shall be digital for improved edge enhancement and detail reproduction. The unit shall have nodes for backlight compensation or normal lighting. The camera synchronization shall be via VD2 (vertical drive) lock which provides roll free picture during systems operation switching. Power source shall be 24vac. Camera shall be UL listed. All cameras shall be home-runned to the Monitoring Station. Camera power a Monitoring Station shall be provided by a single source power supply for each sixteen cameras with a minimum of 5 amps. This power supply should be supplied as and UL enclosed unit.
   See Equipment Listing.
10. The color camera shall incorporate a 1/3" CCD interline transfer pickup device with 380,000 (768[H] x 494[V]) pixels. The camera shall produce a horizontal resolution of 480 lines and signal/noise ration of 50db. The cameras Digital Signal Processing shall minimize aliasing and feature advanced digital backlight compensation. The cameras automatic gain control shall provide clear images in low light conditions. The camera shall display a usable color picture at a scene illumination of 2.0 lux at f/1.4. The camera synchronization shall be internal, line-lock (phase adjustable) and VD2. Power source shall be 24vac. Camera shall be UL listed. All cameras shall be home-runned to the Monitoring Station. Camera power at Monitoring Station shall be provided by a single source power supply for each sixteen cameras with a minimum of 5 amps. This power supply should be supplied as an UL enclosed unit.
    See Equipment Listing.
11. All cameras shall be multiplexed on a DEDICATED MICROS multiplexor duplex unit. This unit shall be a SPRITE DX9R (Controls nine cameras black and white), a SPRITE DX9CR or a SPRITE DX16CR (Controls 16 color cameras) depending on the size and complexity of the installation. These units shall be placed, wired, and housed at the point of human monitoring (ie- Reception Desk, Security Station, etc) in locked cabinetry. Key locks on cabinetry to be supplied by CWRU or its agents and installed by contractor.
    A 110v outlet will be needed at the Monitoring Station for each unit installed.
    CWRU accepts NO EQUIVALENT SUBSTITUTION FOR THIS UNIT.
12. The industrial grade high-density time lapse field recorder shall be a Panasonic model AG-6540. One unit shall be supplied and installed for each DEDICATED MICROS multiplexor duplex unit as specified in item #11. These units shall be placed, wired, and housed at the point of human monitoring (ie- Reception Desk, Security Station, etc) in locked cabinetry. Key locks on cabinetry to be supplied by CWRU or its agents and installed by contractor.
    A 110v outlet will be needed at the Monitoring Station for each unit installed.
    CWRU accepts NO EQUIVALENT SUBSTITUTION FOR THIS UNIT.
13. Video monitors shall be 14" desktop units. The black and white units shall incorporate a minimum of 1000 lines of horizontal resolution. The color unit, if applicable, shall incorporate a minimum of 370 lines of horizontal resolution. Two units shall be supplied and installed for each DEDICATED MICROS multiplexor duplex unit as specified in item #11. these units shall be placed, wired, and housed at the point of human monitoring (i.e- Reception Desk, Security Station, etc) in Locked cabinetry. Key locks on cabinetry to be supplied by CWRU or its agents and installed by contractor.
    A 110v outlet will be needed at the Monitoring Station for each unit installed.
14. Design of Monitoring Station System Housing shall be coordinated with CWRU or its agents to maximize optimal CCTV viewing, multiplexing, recording and operational efficiencies.
15. Contactor shall provide service and operating manuals for all equipment installed. Contractor shall provide training to CWRU or its agents after installation is 100% complete.
16. Installing contactor must be present for test out of all CCTV equipment with CWRU or its agents. If system must be activated in stages per the owner, contractor will be present for test out accordingly.

Sprite

The Sprite range of Video Multiplexer's offer that latest dynamic developments in multi-camera CCTV monitoring and recording. Combining the essential multiplexer benefits with simplicity to provide a most practical means to record, view and control up to 16 CCTV cameras.

Sprite is available in variety of formats for color and monochrome CCTV systems, offering both simplex (SX) and Duplex (DX) formats. Eight rack mount version supplement the standard desktop models. There are also a further size desktop units with complete integrated telemetry control capabilities.

Duplex models perform two of the primary operating modes at any one time. So for example whilst recording, 'live' images can also be monitored within Multiscreen displays, or previous recordings may be reviewed. Simplex models perform just one main mode at a time and are particularly suited to users who's primary requirement is to produce high quality recordings from their CCTV system.

By basing its operation upon a unique 'teletext' key style, Sprite has been made very easy to use. Multiplexer functions, for example, changing the monitor to display a quad, is simple achieved by matching the teletext key on Sprite, with the same teletext key seen on-screen. Even those with no prior CCTV experience quickly pick up both the installation and day-to-day operation.

Each system is e-support compatible, DM's unique service maintenance initiative. this means that changes to the settings and fault diagnosis, including picture grabbing, can be carried out remotely, by the customers service provider, simply by plugging the system into the phone-line.

Added to their excellent picture quality and no nonsense features, each Sprite also includes c-bus alarm and detected movement interaction. These help prioritize operator and recording resources to the camera scenes containing active alarm events.

All models have been provided with spot monitor facilities. This monitor output can either be selected to sequence through all, or some of the camera inputs, or, to display a full screen image of one of the cameras.

A c-bus port provides network access for e-support, as well as bringing back external alarms, signaled exclusively through use of c-bus remote alarm modules or c-bus PIR's In addition SXT9 & SXT9C models have integrated coaxial telemetry control, integrated c-bus telemetry control and DTMF telemetry control (DTMF via Advance cti tad-3 adapter) See specification for telemetry functions & accessories for compatible receivers & adapters

A c-bus port provides network access for e-support, as well as bringing back external alarms, signaled exclusively through use of c-bus remote alarm modules or c-bus PIR's In addition DXT9 models have integrated coaxial telemetry control, integrated c-bus telemetry control and DTMF telemetry control (DTMF via Advance cti tad-3 adapter) See specification for telemetry functions & accessories for compatible receivers & adapters

Provide Simplex (SX) multiplexer facilities for 16 camera color (SX16C, SX16CT & SX16CR) and monochrome (SX16, SX16T & SX16R) systems. SX16R & SX16CR models are housed in a 19 inch 1U high metal enclosure with front panel mounted controls. These units can either be desk, shelf or rack mounted ( ear brackets provided), and have video loop through facilities as standard. Remaining models are styled in ergonomically designed desktop cases, compatible with the Sprite PCM14C(Colour) monitor accessories.

A c-bus port provides network access for e-support, as well as bringing back external alarms, signaled exclusively through use of c-bus remote alarm modules or c-bus PIR's In addition SX16T & SX16TC models have integrated coaxial telemetry control, integrated c-bus telemetry control and DTMF telemetry control (DTMF via Advance cti tad-3 adapter) See specification for telemetry functions & accessories for compatible receivers & adapters

Provide duplex (DX) multiplexer facilities for 16 camera color (DX16CR) and monochrome (DX16, DX16T & DX16R) systems. The DX16R & DX16RC models are housed in a 19 inch 1U high metal enclosure with front panel mounted controls. This unit can either be desk, shelf or rack mounted (ear brackets provide), and has video loop through facilities as standard. DX16 & DX16T models are styled in ergonomically designed desktop case, compatible with the Sprite PCM14M (mono) monitor accessory.

A c-bus port provides network access for e-support, as well as bringing back external alarms, signaled exclusively through use of c-bus remote alarm modules or c-bus PIR's In addition DX16T models have integrated coaxial telemetry control, integrated c-bus telemetry control and DTMF telemetry control (DTMF via Advance cti tad-3 adapter) See specification for telemetry functions & accessories for compatible receivers & adapters

8 programmable function keys provide easy activation of preferred time lapse modes, camera record selections & cameras to be monitored for movement.

The schedule function performs automatically switching between particular programmed functions keys, for up to 4 different times of the day, for each day of the week. very precise recording options can then be run, without the need for any complicated operator instructions.

Utilization of c-bus remote alarm & PIR modules, dramatically reduces the amount of alarm cabling required. Simplifying the installation & termination process, therefore the cost of integrating alarms is much reduced.

Alarm & Movement detection prioritize the recording of important camera scenes to record more evidence is captured.

Relay outputs the energies on alarm (rly 1) & movement (rly2), provide operator notification as well as a trigger to set the time lapse VCR into "Alarm record mode".

Time, date and 12 character camera titles are indelibly recorded onto each frame for reliable evidence.

A second monitor output allows camera sequencing of a preferred camera scenes to be viewed full screen. Feature useful for those requiring a public display monitor as a deterrent to deter potential shoplifters.

On-board security. In addition to the user & installer menu passwords, mode locking protection safeguards units whilst in record, live, or playback and prohibits mode exit unless the correct password is entered., /P>

An automatic camera detection routine, speeds installation especially on systems employing a mixture of both color and monochrome cameras.

A selection table for time lapse VCR's simplifies installation and optimizes system performance.

'End of tape' and 'camera fail' on-screen warnings minimize the loss of important information due to system failure.

Model options with integrated telemetry control offer a complete single keyboard surveillance package.

The c-bus communication network used by sprite promotes improved installation standards and support, and enhances the system's overall capabilities.

Color Framestore;

Recording method; UV(R-Y,B-Y)

Sampling rate; 13.5Mhz.

Sample per line PAL;720 horizontal x 448 vertical, 256 levels of gray 8 bit luma. 16.8 million colors fully implemented to specification CCIR 601, the global standard for 4:2:2 digital component video. Sample per line NTSC; 720 horizontal x 512 vertical, 256 levels of grey 8 bit luma. 16.8 million colors fully implemented to specification CCIR 601, the global standard for 4:2:2 digital component video. Mono Framestore;

Sampling rate; 16Mhz.

Sample per line CCIR;832 horizontal x 512 vertical, 1024 levels of grey 10 bit luma.

Sample per line EIA;832 horizontal x 448 vertical, 1024 levels of grey 10 bit luma.

Main monitor screen modes; Full screen digital x2 zoom facility with full movement of the magnified image within the field of view, quad8 + 2 multiscreen, 9 way, 16 way, sequence, hold or freeze-frame.

Spot monitor screen modes; Displays one full screen camera or sequences through all or an edited group of cameras.

Video inputs; Camera Inputs: 9 or 16 (1 BNC connector per channel) individually menu selected to 75 termination. Loop through BNC connectors on sx-r, dx-r models.

CCIR/PAL: 635 lines, 50 fields per second.
EIA/NTSC:525 lines, 60 fields per second

Video outputs Mon A Main digital monitor, via BNC composite video connector or alternatively via S-Video 4 pin mini Din Connector on DX9CR & DX16Cr models.

Video outputs Mon B Sequence or spot monitor outlet. Composite video via BNC connector.

VCR output; Mutliplex encoded output, via BNC composite video connector or alternatively via S-video 4-pion mini DIN connector on DX9CR & DX16CR models.

Telemetry control signaling options; SXT,DXT models facilitate telemetry control either up the coax (FSK Signaling) to CR3,CR4,CR5 receiver; via c-bus to DR4+ receiver or via Advance cti accessory via drop wire 10(DTMF Signaling) also to DR4+ receiver.

Supported telemetry functions; Pan, tilt, zoom, focus, iris, wash, wipe, ir lamps, autopan, presets (9 on 9 camera models, 16 on 16 camera models) & sequence patrol mode. Other functions can be sent through * or # commands available through telemetry menu.

C-bus termination; MMJ connector providing c-bus "A & B" signaling as well as 8 V d.c. output as local PSU for c-bus accessory devices.

Movement detection Priority recording on camera movement. b x 8 grid, individually selectable for each camera input. % sensitivity levels for variations in scene type. Option for relay 2 output controlled by movement detection.

Camera Alarm inputs; 1 input per camera input which can be set to respond to either any 1 of 16 alarm inputs on up to 16 separate c-bus remote alarm modules, or an activation from any 1 to 16 c-bus PIR's.

VCR "tape out" or global alarm input; rear panel AUX-/+ (screw type terminals)

Alarm Outputs; two light dury relay outputs R1 and R2 (550ma @ 12v - 48v max). Used to set/reset a time lapse VCR into 3hr mode (2hr NTSC) for the duration of the alarm. Output can also be sued to trigger external audible/visual alarm prompt device.

Temperature range; operating Range 0-40 degrees Celsius.

Power requirements; 90-264V a/c., 50/60 Hz supplied to external PSU\, which provides D.C. input required (External PSU rated either 25W simplex models, 43W duplex models provided as standard)

Physical characteristics desk mount; dimensions 83(H) x 325(W) x 450(D); weight 1kg.

Physical characteristics rack mount; dimensions 48(H) x 432(w) x 325(D); weight 2kg.

ACCESSORIES

e-support Pack DM's unique remote set up servicing initiative (minus grab),

c-bus Remote Provides alarm input functionality on all models
Alarm Module

Video Monitors;			Color monitor - PCM 14C
				Mono Monitor - PCM 14 CM

CCD Cameras;			Color CCD camera - DM/T420 1/3 inch 330 TVL
				Color CCD camera - DM/T430 1/2 inch 470 TVL
				Monochrome CCD camera - DM/T380 1/3 inch 400 TVL
				Monochrome CCD camera - DM/T400 1/3 inch 600 TVL

Coaxial Telemetry		CR3(240V a/c in 240V a/c out) - DM/BBR2/230 A01R
Receivers			CR3(24V a/c in 24V a/c out) - DM/BBR2/230 AT1R
				CR4(240V a/c in 240V a/c out) - DM/BBR1/230 A01R
				CR4(240V a/c in 24V a/c out) - DM/BBR1/230 A01R
				CR5(D.C. receiver) - DM/BBR3/230 A01R

c-bus/DTMF			DR4+ (240V a/c. in 240V a/c out) - DM/MMT2A/230AO1R
Telemetry			DR4+ (24V a/c. in 24V a/c out) - DM/MMT2A/230AO1R
Receivers

c-bus - DTMF			Advance cti - DMTAD3/230GB (240V a/c. In)
converters			Advance cti - DMTAD3/012 (12V D.C. In)