[an error occurred while processing this directive]
Home Page

Recent Publications

 
 

Refereed Journals:

  1. H. Yamada, I. Manas-Zloczower and D. L. Feke, 1997,“Influence of Matrix Infiltration on the Dispersion Kinetics of Carbon Black Agglomerates”, Powder Technology, 92,163-169.
  2. H. Cheng and I. Manas-Zloczower, 1997, “Chaotic Features of Flow in Polymer Processing Equipment - Relevance to Distributive Mixing”, International Polymer Processing, XII (2),p.83-91.
  3. H. Cheng and I. Manas-Zloczower, 1997,“Study of Mixing Efficiency in Kneading Discs of Co-rotating Twin Screw Extruders”, Polymer Engineering and Science, 37(6),p.1082-1090.
  4. E. Repidonis, D.L.Feke and I. Manas-Zloczower, 1997,“Cohesivity and Colloidal Properties Affecting the Dispersibility of Ni/Sb -Doped TiO2 Pigments”, Particle and Particle Systems Characterization, 14(5),p.243-250.
  5. C.H. Yao and I. Manas-Zloczower, 1997, “Influence of Design on Mixing Efficiency in a Variable Intermeshing Clearance Mixer”, International Polymer Processing, XII (2),p.92-103.
  6. A. Raab, D.L.Feke and I. Manas-Zloczower, 1997,“Influence of Structure and Interfacial Chemistry on the Permeability of Particle Clusters” , Journal of Colloidal and Interface Science, 189,p.131-136.
  7. Q. Li, D.L. Feke and I. Manas-Zloczower, 1997,“Comparison of Stability and Dispersion Characteristics Of Organic Pigment Agglomerates” Powder Technology,.92,17-24.
  8. H. Yamada, I. Manas-Zloczower and D.L. Feke, 1998,“ The Influence of Matrix Viscosity and Interfacial Properties on the Dispersion Kinetics of Carbon Black Agglomerates”, Rubber Chemistry and Technology, 71, 1-16.
  9. H. Yamada, I.Manas-Zloczower and D.L.Feke,1998, “Observation and Analysis of the Infiltration of Polymer Liquids into Carbon Black Agglomerates”, Chem. Eng. Science, 53, 1963-1972.
  10. H. Cheng and I. Manas-Zloczower, 1998,“Distributive Mixing in Conveying Elements of a ZSK-53 Corotating Twin Screw Extruder”, Polymer Eng. Science, 38(6), 926-935.
  11. P. Levresse, D.L.Feke and I.Manas-Zloczower, 1998, “Analysis of the Formation of Bound Poly(dimethylsiloxane) on Silica”, Polymer, 39(17), 3919-3924.
  12. C.H. Yao and I. Manas-Zloczower, 1998,“Influence of Design on Dispersive Mixing Performance in an Axial Discharge Continuous Mixer LCMAX-40” Polymer Eng. Sci., 38(6), 936-946.
  13. C. H. Yao, I. Manas-Zloczower, R. Regalia and L. Pomini, 1998 “Distributive Mixing in Variable Intermeshing Clearance Mixers: Simulation and Experiments”, Rubber Chem. Technol. , 71 (4), 690-707.
  14. C.H.Yao and I.Manas-Zloczower, 1998 “Distributive Mixing in an Axial Discharge Continuous Mixer – LCMAX 40 with Various Designs”, International Polymer Processing, Vol. XIII, No. 4, 334-341.
  15. D. Nichetti and I. Manas-Zloczower, 1998,“Viscosity Model for Polydisperse Polymer Melts”, J. Rheol., 42(4), 951-970.
  16. J.R.Kim, A.Jamieson, S.D.Hudson, I. Manas-Zloczower and H.Ishida, 1998, “The Influence of Exothermic Interaction on the Morphology and Droplet Coalescence of a Melt-Mixed Immiscible Polymer Blends Containing a Block Copolymer, Macromolecules, 31, 5383-5390.
  17. H.Cheng and I. Manas-Zloczower, 1998,” Influence of Design on Mixing Efficiency in the Kneading Disc Region of Corotating Twin Screw Extruders”, Journal of Reinforced Plastics and Composites, vol. 17 (12), 1076-1086.
  18. D. Nichetti and I. Manas-Zloczower, 1999,”Influence of Molecular Parameters on Material Processability in Extrusion Processes”, Polymer Eng. Sci., 36(5), p.887-895.
  19. L. Popovich, D.L.Feke and I. Manas-Zloczower, 1999 “Influence of Physical and Interfacial Characteristics on the Wetting and Spreading of Fluids on Powders”, Powder Technology, 104, 68-74.
  20. P. Levresse, I. Manas-Zloczower, D. L. Feke , Y. Bomal and D. Bortzmeyer,1999, ”Observation and Analysis of the Infiltration of Liquid Polymers into Calcium Carbonate Agglomerates,” Powder Technology, 106, 62-70.
  21. A. J. Ramic, S. D. Hudson, A. M. Jamieson and I. Manas-Zloczower, 2000, “Temporary Droplet-Size Hysteresis in Immiscible Polymer Blends”, Polymer, 41, 6263-6270.
  22. A. J. Ramic, J. C. Stehlin, S. D. Hudson, A. M. Jamieson and I. Manas-Zloczower, 2000,“Influence of Block Copolymer on Droplet Breakup and Coalescence in Model Immiscible Polymer Blends”, Macromolecules, 33, 371-374.
  23. M. Teverovskiy, I. Manas-Zloczower, P. Elemans and G. Rekers, 2000, “Numerical Simulations and Experiments in a Double-Couette Flow Geometry”, International Polymer Processing, Vol. XV, No. 3. 242-254.
  24. J.R.Kim, S.D.Hudson, A.Jamieson, I. Manas-Zloczower and H.Ishida, 2000, “The Influence of Segmental Swelling of an Asymmetric Block Copolymer on the Morphology of Melt-Mixed Immiscible Polymer Blends”, Polymer, 41(2), 9163-9168.
  25. P. Levresse, I. Manas-Zloczower and D. L. Feke, 2001, “Hydrodynamic Analysis of Porous Spheres with Infiltrated Peripheral Shells in Linear Flow Fields”, Chemical Engineering and Science, Chemical Engineering and Science, vol. 56, p.3211-3220.
  26. W. Wang and I. Manas-Zloczower, 2001,“Temporal Distributions: The Basis for the Development of Mixing Indexes for Scale-up of Polymer Processing Equipment”, Polymer Engineering and Science, vol. 41(6), 1068-1077.
  27. I. Manas-Zloczower, 2001,“Recent Developments in Studying Mixing Efficiency of Polymer Processing Equipment”, Journal of the Society of Rubber Japan, Vol. 74, No. 2, 46-51.
  28. W. Wang, I. Manas-Zloczower and M. Kaufman, 2001, “Characterization of Distributive Mixing in Polymer Processing Equipment using Renyi Entropies”, International Polymer Processing, Vol. 16, No. 4, 315-322.
  29. P. Levresse, I. Manas-Zloczower and D. L. Feke, 2002, “Dispersion Studies of Agglomerates in Steady and Dynamic Flows of Polymeric Materials, Rubber Chemistry and Technology, Vol. 75, No. 1, 119-133.
  30. A. Scurati, I. Manas-Zloczower and D. L. Feke, 2002, ” Influence of Powder Surface Treatment on the Dispersion Behavior of Silica into Polymeric Materials”, Rubber Chemistry and Technology, Vol. 75, No. 4, 725-739.
  31. N. Nithi-Uthai and I. Manas-Zloczower, 2002, “ Numerical Studies of the Effect of Constitutive Model Parameters as Reflecting Molecular Structure on Extrudate Swell”, Journal of Applied Rheology, Vol. 12, No.5, 252-259.
  32. C. Pomchaitaward, I. Manas-Zloczower and D. L. Feke, 2003, “Investigation of the Dispersion of Carbon Black Agglomerates of Various Sizes in Simple-Shear Flows”, Chemical Engineering Science, Vol. 58, 1859-1865.
  33. C. Pomchaitaward, I. Manas-Zloczower and D. L. Feke, “Lattice Boltzmann Simulation of Capillary Infiltration in Agglomerates and Beds of Fine Particles”, Advanced Powder Technology, accepted for publication in 2002.
  34. W. Wang, I. Manas-Zloczower and M. Kaufman, 2003 “Entropic Characterization of Distributive Mixing in Polymer Processing Equipment”, AICHE Journal, Vol. 49, No. 7, 1637-1644.
  35. W. Wang, I. Manas-Zloczower and M. Kaufman, “Entropy Time Evolution in a Twin Flight Single Screw Extruder and its Relationship to Chaos”, Chemical Engineering Communications, accepted for publication in 2003.
  36. W. Wang, I. Manas-Zloczower and M. Kaufman, “Influence of initial conditions on distributive mixing in a twin flight single screw extruder”, Chemical Engineering Communications, accepted for publication in 2004.
  37. N. Nithi-Uthai and I. Manas-Zloczower, 2003,“Numerical Simulation of Sharkskin Phenomena in Polymer Melts”, Journal of Applied Rheology, Vol. 13, No. 2, 79-86.

Conference Proceedings:

  1. I. Manas-Zloczower, 2000, “ Analysis of Mixing Efficiency in Processing Equipment through Flow Simulations”, 16th PPS Annual Meeting Proceedings.
  2. I. Manas-Zloczower, 2000, “Factors Affecting Mechanisms and Kinetics of Agglomerate Dispersion”, PPS Europe/Africa Regional Meeting Proceedings.
  3. A. Scurati, D. L. Feke and I. Manas-Zloczower, 2000, “Influence of Morphology and Packing Density on the Permeability of Fine Particle Agglomerates”, AICHE Annual Meeting Proceedings.
  4. W. Wang and I. Manas-Zloczower, 2001, “Dispersive and Distributive Mixing Characterization in Extrusion Equipment”, ANTEC Proceedings, p. 220-225.
  5. Wang and I. Manas-Zloczower, 2001, “Analysis of Dispersive and Distributive Mixing in Terms of Minor Component Size and Spatial Distributions in Continuous Polymer Processing Equipment”, The 2001 NSF Design, Service and Manufacturing Grantees Research Conference Proceedings.
  6. J. Boyle, I. Manas-Zloczower and D. L. Feke, 2001,“Effect of Fluid Infiltration on the Dispersion Behavior of Powder Agglomerates”, 17th Annual PPS Meeting Proceedings.
  7. W. Wang and I. Manas-Zloczower, 2002, “Analysis of Distributive Mixing in Terms of Renyi Entropies in Continuous Polymer Processing Equipment”, The 2002 NSF Design, Service and Manufacturing Grantees Research Conference Proceedings.
  8. Manas-Zloczower, W. Wang and M. Kaufman, 2002,“Chaotic Features of Flow in Polymer Processing Equipment – Relevance to Distributive Mixing” PPS-18 Annual Meeting Proceedings.
  9. Scurati, D. L. Feke and I. Manas-Zloczower 2002, “Influence of Powder Surface Treatment and Flow Geometry on the Dispersion Behavior of Silica into Polymeric Materials”, PPS-18 Annual Meeting Proceedings.
  10. W. Wang, I. Manas-Zloczower and M. Kaufman, 2003, “Characterization of Dynamics of Mixing in Polymer Processing and Its Relationship to Chaos”, The 2003 NSF Design, Service and Manufacturing Grantees Research Conference Proceedings.
  11. J. Boyle, D.L.Feke and I. Manas-Zlczower 2003, “Mechanisms of Adhesive and Cohesive Failure in Agglomerate Dispersion”, PPS-19 Annual Meeting Proceedings.
  12. K. Alemaskin, I. Manas-Zloczower and M. Kaufman 2003, “Simultaneous Characterization of Dispersive and Distributive mixing in a Single Screw Extruder”, ANTEC Proceedings.
  13. P. Gopalkrishnan, I. Manas-Zloczower, and D.L. Feke, 2003, “Predicting failure modes in agglomerates: adhesive or cohesive, from a fundamental analytical model to estimate binder-induced interactions”, AICHE Annual Meeting Proceedings.
  14. J. Boyle, I. Manas-Zloczower and D. L. Feke, 2003, “Analysis of Cohesive and Adhesive Failure Mechanisms in Agglomerate Dispersion”, AICHE Annual Meeting Proceedings.
  15. M. Camesasca, K. Alemaskin, I. Manas-Zloczower and M. Kaufman, 2004, “Entropic Measures of Mixing Tailored for various Applications”, The 2004 NSF Design, Service and Manufacturing Grantees Research Conference Proceedings.
  16. K. Alemaskin, M. Camesasca, I. Manas-Zloczower and M. Kaufman, 2004, “Entropic Measures of Mixing Tailored for various Applications”, NUMIFORM-2004 Proceedings.
  17. K. Alemaskin, M. Camesasca, I. Manas-Zloczower, M. Kaufman, E.K. Kim, M. A. Spalding, W. A. Trumbull and R. D. Swain, 2004, “Entropic Mixing Characterization in a Single Screw Extruder, SPE-ANTEC Proceedings.
 

  Home


[Toolbar]
kirill.alemaskin@cwru.edu -- About this server -- Copyright 1997 CWRU -- Unauthorized use prohibited